Silicon nitride ceramic bearing balls G5, matte black Si3N4 spheres in several diameters
Close-up of a precision-ground G5 silicon nitride ceramic bearing ball
Size comparison of 3 mm, 6 mm, 10 mm, 15 mm and 25 mm silicon nitride balls

Product images illustrate typical silicon nitride bearing balls. Actual diameter, surface finish and packaging depend on the ordered specification.

Silicon Nitride Ceramic Bearing Balls G5

ISO 3290-2 Grade G5 Precision Balls for Hybrid and Full Ceramic Bearings

Si₃N₄ ceramic bearing balls finished and sorted to ISO 3290-2 Grade G5. The grade controls diameter variation, sphericity, surface roughness and lot consistency. Nominal diameter and Ball Gauge are specified separately on the order.

Manufactured by XIAMEN AOFE NEW MATERIAL CO.,LTD., Xiamen, China. For OEM and bearing-maker projects we review diameter, gauge, quantity and inspection requirements before confirming supply. Diameter range 3–25 mm, subject to production capability.

Product Type:
Silicon Nitride Ceramic Bearing Balls G5

Precision Grade:
G5, ISO 3290-2

Diameter Range:
3-25 mm, subject to confirmation

Ordering Basis:
Nominal Diameter + Grade G5 + Ball Gauge

Product Overview

Silicon Nitride Ceramic Bearing Balls from AOFE MIMCustom are finished rolling elements made from bearing-grade Si₃N₄. Geometric accuracy, surface quality and sorting precision follow ISO 3290-2 Grade G5.

Buyers use these balls in hybrid bearings, full ceramic bearings and other high-speed or electrically demanding assemblies. Ball material does not set the speed, life or load rating of the finished bearing. Those results also depend on the raceways, cage, lubrication, preload, fit and operating temperature.

A complete purchase specification is the nominal diameter, Grade G5 and the Ball Gauge. Surface defect and waviness limits, where required, should be written into the purchase agreement.

Product Appearance and Size Range

Relative size of silicon nitride balls from 3 mm to 25 mm

G5 Precision Grade and Tolerances (ISO 3290-2)

These limits apply to finished silicon nitride balls of grade G5. They are geometric and sorting limits, not a nominal-diameter tolerance of ±0.13 μm.

Inspection Item Symbol G5 Maximum
Variation of ball diameter VDw 0.13 μm
Deviation from spherical form ΔRSw 0.13 μm
Surface roughness Ra 0.014 μm
Variation of ball lot diameter VDwL 0.25 μm
Ball gauge interval — 1.0 μm
Ball subgauge interval — 0.2 μm

Procurement note: A 10.000 mm G5 ball is not automatically 10.000 mm ±0.13 μm. State the nominal diameter and the Ball Gauge you need. Preferred gauges are typically from −5 μm to +5 μm.

ISO 3290-2 leaves some surface-defect and waviness limits to agreement between buyer and supplier. State crack, chip, pit, scratch and internal-defect criteria in the order if they are acceptance items.

Typical Material Properties

These figures are typical reference values for bearing-grade silicon nitride. They are not G5 requirements and are not guaranteed properties unless a batch material certificate says so.

Property Typical Reference Range Unit
Density 3.20-3.30 g/cm³
Vickers hardness 1,400-1,500 HV10
Elastic modulus 300-320 GPa
Flexural strength ≥ 700 MPa
Compressive strength ≥ 2,800 MPa
Fracture toughness ≥ 6.5 MPa·m½
Thermal expansion about 3.0-3.5 ×10⁻⁶/K
Thermal conductivity 20-30 W/(m·K)
Magnetic property Non-magnetic —
Electrical property Electrical insulator —

Compared with bearing steel, silicon nitride is roughly 40% of the density, substantially harder, electrically insulating and non-magnetic. Chemical resistance still depends on the medium and the operating conditions.

Available Diameters

Common catalogue diameters. “Common inquiry” means these sizes are the usual starting point for a quotation. It does not mean every size is in stock.

Nominal Diameter (mm) Inch Equivalent How to Enquire
3.000 — Confirm capability
3.175 1/8″ Common inquiry
4.7625 3/16″ Common inquiry
5.000 — Confirm capability
6.350 1/4″ Common inquiry
7.9375 5/16″ Common inquiry
9.525 3/8″ Common inquiry
10.000 — Confirm capability
12.700 1/2″ Common inquiry
15.875 5/8″ Confirm capability
19.050 3/4″ Confirm capability
25.000 — Confirm capability

Where These Balls Are Used

High-speed spindles and CNC equipment, where lower ball mass reduces centrifugal load.

Electric motors and generators, where an insulating, non-magnetic rolling element can reduce electrical erosion risk.

Semiconductor equipment, robotics and other precision machines that need stable geometry and a fine rolling surface.

Suitability is confirmed against the bearing design and the duty, not from the ball grade alone.

Inspection You Can Request

A G5 shipment can be supplied with a dimensional inspection report covering ball diameter variation, deviation from spherical form, surface roughness and lot diameter variation. A material certificate can be supplied for the silicon nitride grade used on that order.

Ask for these documents in the inquiry if they are required before you place the order. HIP, where used, is confirmed from the process record for that material route. It is not assumed for every lot.

Frequently Asked Questions

What does G5 mean?

Under ISO 3290-2, G5 limits single-ball diameter variation to 0.13 μm, deviation from spherical form to 0.13 μm, surface roughness to Ra 0.014 μm, and lot diameter variation to 0.25 μm.

How is G5 different from G3?

G3 is tighter: 0.08 μm for diameter variation and sphericity, and Ra 0.010 μm. G5 is the grade most industrial buyers specify when they need precision without moving to G3.

What should I send for a quotation?

Nominal diameter, Ball Gauge, grade, quantity, and whether you need a dimensional report or material certificate. A drawing helps when the gauge or the defect criteria are already defined.

Related Products

These products use the same silicon nitride material or the same bearing assembly. Open the page that matches the part you actually buy.

Hybrid Silicon Nitride Bearings
Steel rings with Si₃N₄ balls for high-speed spindles and electric motors.

Full Ceramic Bearings
Rings and balls both in ceramic, for insulation, corrosion or non-magnetic duty.

Silicon Nitride Bearing Rings
Inner and outer rings ordered with the balls for a matched bearing build.

Deep Groove Ball Bearings
The bearing type most often fitted with these G5 silicon nitride balls.

Request a Quote

Send these items and we will reply with capability, price and lead time for the stated size:

1. Nominal diameter – for example 6.350 mm or 1/4 inch.

2. Precision grade – G5, or G3 if required.

3. Ball Gauge – the mean-diameter offset you need, if already known.

4. Quantity – prototype quantity or production quantity.

5. Documents – dimensional inspection report, material certificate, packaging or marking.

Send This Specification

G5 limits follow ISO 3290-2. Material figures are typical values and are confirmed on the certificate for the supplied grade. Diameter availability is confirmed against the inquiry. Product photographs are typical illustrations, not a specific production lot.